An impact crusher uses a high-speed rotor and impact plates to break rock into smaller particles. In Indonesia, impact crushers can produce aggregates for quarry operations, road construction, concrete production, and other infrastructure projects. ANDAMINE offers two types of impact crusher series for different crushing requirements. The APF series is suitable for aggregate production and medium crushing, while the APF-H series features hydraulic adjustment and is designed to achieve a higher crushing ratio when processing medium- to low-hardness materials. The right model depends on the feed material, maximum feed size, output grading, and target production capacity.
Impact crushers for sale in Indonesia are available in different models to meet various feed size, production capacity, and aggregate requirements. ANDAMINE offers two impact crusher types: APF Impact Crusher and APF-H Hydraulic Impact Crusher. The APF series is designed for crushing and aggregate production, while the APF-H series offers coarse- and medium-crushing models to suit different feed sizes and production requirements.
For Indonesian quarry operators and aggregate producers, the right impact crusher depends on the raw material, maximum feed size, required finished product size, and target production capacity. Compare the two series below to identify a suitable model for your project.
| Comparison | APF Series | APF-H Series |
|---|---|---|
| Crusher Type | Standard Impactor Crusher | Hydraulic Impact Crusher |
| Capacity | 50–550 t/h, depending on model | 100–500 t/h, depending on model and configuration |
| Max. Feed Size | Up to 900 mm, depending on model | Up to 1,300 mm for coarse-crushing models and up to 700 mm for medium-crushing models, according to the supplied specifications |
| Finished Product Size | 5–200 mm, depending on model and configuration | Depends on the model, feed material, and crusher settings |
| Crushing Configuration | Impact crushing for material reduction and aggregate shaping | Coarse- and medium-crushing configurations for different feed requirements |
| Suitable Materials | Limestone, granite, and other compatible materials, subject to material properties | Materials suitable for impact crushing, depending on hardness, abrasiveness, and model specifications |
| Typical Applications | Quarrying, aggregate production, mining, and road construction | Quarrying, aggregate production, hydropower projects, and highway construction |
| Key Advantage | Three impact chambers support further crushing and particle shaping | Multiple coarse- and medium-crushing models with different feed openings and rotor dimensions |
The APF Series uses three impact chambers for further crushing and shaping, making it suitable for Indonesian quarries producing concrete and road aggregates.
The APF-H Series offers coarse- and medium-crushing options for different feed sizes and production needs in Indonesian quarries.
Indonesia’s quarrying, road construction, and urban development projects need a reliable supply of crushed aggregates. ANDAMINE offers tire-type and crawler-type mobile impact crushers for on-site aggregate production and suitable construction waste recycling. Whether you process limestone for road projects or recycle concrete waste, choose a configuration based on your material, target output, capacity, and site conditions. Explore our mobile crusher plant solutions for your project in Indonesia.
Choosing the right impact crusher starts with matching equipment specifications to your material, required output, and production targets. Compare the models below to evaluate their capacity, maximum feed size, motor power, and other key parameters for your crushing project in Indonesia.
| Crushing Series | Model | Inlet Size (W × H) (mm) | Max. Feeding Size (mm) | Rotor Diameter (mm) | Rotor Width (mm) | Motor Power (kW) | Material Recycling Speed (r/min) | Coarse-Crushing Speed (r/min) | Medium-Crushing Speed (r/min) | Rotor Weight (kg) | Total Weight (kg) | Dimensions (L × W × H) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Coarse Crushing | APF-1210H | 1020 × 1080 | 800 | 1200 | 1000 | 110 / 132 / 160 | 490–580 | 555–620 | 620–695 | — | 12800 | 2698 × 2126 × 3030 |
| APF-1313H | 1320 × 1225 | 900 | 1300 | 1300 | 132 / 160 / 200 | 460–520 | 520–585 | 585–660 | 6340 | 17800 | 2972 × 2560 × 3300 | |
| APF-1415H | 1540 × 1320 | 1000 | 1400 | 1500 | 160 / 200 / 250 | 390–495 | 495–550 | 550–615 | 8165 | 21815 | 2985 × 2790 × 3375 | |
| APF-1620H | 2040 × 1634 | 1300 | 1600 | 2000 | 250 / 315 / 2 × 200 | 360–400 | 400–500 | — | 15980 | 40500 | 3480 × 3600 × 4200 | |
| Medium Crushing | APF-1007H | 750 × 890 | 500 | 1000 | 700 | 55 / 75 / 90 | 525–660 | 660–705 | 705–940 | — | 7240 | 2596 × 1804 × 1857 |
| APF-1110H | 1020 × 820 | 600 | 1100 | 1000 | 110 / 132 / 160 | 460–620 | 620–695 | 695–830 | 3065 | 9250 | 2626 × 2160 × 1945 | |
| APF-1213H | 1320 × 880 | 600 | 1200 | 1300 | 132 / 160 / 200 | 435–585 | 585–615 | 645–780 | 4850 | 12780 | 2809 × 2529 × 2091 | |
| APF-1315H | 1540 × 930 | 600 | 1300 | 1500 | 160 / 200 / 250 | 410–520 | 525–585 | 585–700 | 6370 | 16130 | 2875 × 2750 × 2221 | |
| APF-1520H | 2040 × 995 | 700 | 1500 | 2000 | 250 / 2 × 160 / 2 × 200 | 370–450 | 450–510 | 510–610 | 10400 | 27100 | 3391 × 3400 × 2513 |
| Model | Rotor Diameter × Length (mm) | Inlet Size (mm) | Max. Feeding Size (mm) | Capacity (t/h) | Power (kW) | Weight (t) | Dimensions (L × W × H) (mm) |
|---|---|---|---|---|---|---|---|
| APF1007 | Φ1000 × 700 | 400 × 730 | 250 | 30–50 | 55 | 9.5 | 2400 × 1550 × 2660 |
| APF1010 | Φ1000 × 1050 | 400 × 1080 | 300 | 40–80 | 75 | 12.2 | 2400 × 2250 × 2620 |
| APF1210 | Φ1250 × 1050 | 450 × 1060 | 300 | 70–120 | 110 | 15 | 2690 × 2338 × 2890 |
| APF1214 | Φ1250 × 1400 | 450 × 1430 | 300 | 90–180 | 132 | 18.6 | 2690 × 2688 × 2890 |
| APF1315 | Φ1320 × 1500 | 550 × 1530 | 400 | 150–250 | 250 | 19.5 | 3096 × 3273 × 2667 |
| APF1320 | Φ1320 × 2000 | 610 × 2030 | 500 | 160–350 | 2 × 200 | 28 | 3096 × 3560 × 3185 |
| APF1520 | Φ1500 × 2000 | 830 × 2040 | 700 | 300–500 | 2 × 250 | 43 | 3890 × 3564 × 3220 |
| Note: Production capacity depends on the material properties, feed size, feed grading, and operating conditions. Confirm the final model specifications with ANDAMINE before ordering. | |||||||
| 2-in-1 Tire Type Mobile Impact Crusher Specification | ||
|---|---|---|
| Model | APY2-1213F-S3 | APY-1315F-S3 |
| Machine power（kw） | 223 | 285.5 |
| Processing capacity（tph） | 80-280 | 100-350 |
| Main Crusher | ||
| Model | APF-1213H | APF-1315H |
| Motor power（kw） | 160 | 250 |
| Maximum feed（mm） | 300 | 300 |
| Belt Conveyor | ||
| Screen conveyor | B1000 | B1200 |
| Discharge height (mm) | >3100 | >3100 |
| Vibrating screen | ||
| Model | APY-1860-S3 | APY-2160-S3 |
| Motor power（kw） | 2*7.5 | 2*11 |
| Speed（r/min） | 1000 | 1000 |
| 3 in 1 Tire Type Mobile Impact Crusher Specification | ||||
|---|---|---|---|---|
| Model | APY3-1110F-S3 | APY3-1210F-S3 | APY3-1213F-S3 | APY3-1315F-S3 |
| Machine power (kw) | 199.9 | 202.4 | 270.4 | 346.5 |
| Machine processing capacity (t/h) | 50-110 | 70-120 | 80-150 | 130-260 |
| Vibrating feeder | ||||
| Model | APG-0930Z | APG-0930Z | APG-9538Z | APG-1145Z |
| Feed trough width (mm) | 800 | 800 | 900 | 1100 |
| Length(mm) | 3000 | 3000 | 4000 | 4800 |
| Main Crusher | ||||
| Model | APF-1010H | APF-1210H | APF-1214H | APF-1315H |
| Motor power (kw) | 132 | 132 | 200 | 250 |
| Feeding depth (mm) | 500 | 600 | 600 | 700 |
| Feeding width (mm) | 400 | 400 | 400 | 400 |
| Maximum feed (mm) | 420 | 420 | 500 | 600 |
| Discharge port (mm) | >30 | >30 | >30 | >30 |
| Vibrating screen | ||||
| Model | APS-1548Y3 | APS-1548Y3 | APS-1860Y3 | APS-2160Y3 |
| Motor power (kw) | 2*5.5 | 2*5.5 | 2*7.5 | 2*11 |
| Belt Conveyor | ||||
| main conveyor | B800*11m | B800*11m | B1000*11m | B1200*12m |
| Power (kw) | 11 | 11 | 11 | 15 |
| Feeding conveyor B800 | B800*16m | B800*16m | B1000*16m | B1200*17m |
| Power (kw) | 15 | 15 | 15 | 15 |
| Screen conveyor B800 | B800*7.5m | B800*7.5m | B1000*7.5m | B1200*7.5m |
| Power (kw) | 5.5 | 5.5 | 7.5 | 11 |
| Silo volume (m³) | 3 | 3 | 4 | 5 |
| Conveyor discharge height (m) | >4.5 | >4.5 | >4.5 | >4.5 |
| Generator power (kw) | 300 | 300 | 400 | 500 |
| Crawler Type Mobile Impact Crusher Specification | |||
|---|---|---|---|
| Model | APYL2-1110F-S | APYL2-1213F-S | APYL2-1315F-S |
| Power(kw) | 217.2 | 265.8 | 347.2 |
| Capacity(t/h) | 80-150 | 110-220 | 150-300 |
| Feeding hopper | |||
| Volume(m³) | 3 | 4 | 5 |
| Vibrating feeder | |||
| Model | APG-0930Z | APG-9538Z | APG-1145Z |
| Width of material trough(mm) | 800 | 950 | 1100 |
| Length(mm) | 3000 | 3800 | 4500 |
| Power(kw) | 2*2.2 | 2*3.7 | 2*7.5 |
| Impact Crusher | |||
| Model | APF-1110H | APF-1213H | APF-1315H |
| Power(kw) | 132-160 | 200-250 | 280-315 |
| Max.Feeding Size(mm) | 450 | 500 | 600 |
| Return screen | |||
| Mesh Spec.(mm) | 1500*3600 | 1500*4200 | 1800*4200 |
| Power(kw) | 6.12 | 6.12 | 6.12 |
| Main belt conveyor | |||
| Belt Width(mm) | B1000 | B1000 | B1200 |
| Reducer Power(kw) | 7.5 | 7.5 | 11 |
| Belt Speed(m/s) | 1.6 | 1.6 | 1.6 |
| Side belt conveyor(Optional) | |||
| Belt Width(mm) | B650 | B650 | B650 |
| Reducer Power(kw) | 4 | 4 | 4 |
| Discharge Height(mm) | 2100 | 2100 | 2200 |
| Belt Speed(m/s) | 1.6 | 1.6 | 1.6 |
| Lower belt conveyor | |||
| Belt Width(mm) | B1000 | B1000 | B1200 |
| Reducer Power(kw) | 7.5 | 7.5 | 11 |
| Discharge Height(mm) | 3200 | 3200 | 3200 |
| Belt Speed(m/s) | 1.6 | 1.6 | 1.6 |
| Belt transfer conveyor | |||
| Belt Width(mm) | B650 | B650 | B650 |
| Reducer Power(kw) | 4 | 4 | 4 |
| Belt Speed(m/s) | 1.6 | 1.6 | 1.6 |
| Return belt conveyor | |||
| Belt Width(mm) | B500 | B500 | B500 |
| Reducer Power(kw) | 5.5 | 5.5 | 5.5 |
| Belt Speed(m/s) | 1.6 | 1.6 | 1.6 |
| Crawler Width(mm) | 500 | 500 | 500 |
| Magnetic Separator | |||
| Model | RCYD-10 | RCYD-10 | RCYD-12 |
| Power(Kw) | 3 | 3 | 4 |
| Hanging Height(mm) | 300 | 300 | 350 |
| magnetic field intensity(mT) | 70 | 70 | 70 |
| Weight(Kg) | 2120 | 2120 | 2250 |
| Dimension: L×D×H(mm) | 2660x1550x920 | 2660x1550x920 | 2880x1720x1010 |
What Is the Price of Impact Crushers in Indonesia? Impact crusher prices in Indonesia typically range from US$27,000–US$72,300 (approximately IDR 440 million–IDR 1.18 billion) for a crusher unit, depending on the model, capacity, configuration, and technical specifications. Mobile impact crushing plants may cost more depending on the equipment included in the complete setup.
The final price also depends on feed size, required output, shipping, taxes, and installation requirements. For an accurate quotation, share your material type, target capacity (t/h), required output size, and project location in Indonesia with our team. *Prices shown are estimated ex-factory cost. Final quotation depends on configuration, shipping, Indonesian import tax and site conditions.
Contact us to discuss a suitable impact crusher configuration and request a project-specific quotation.
Choosing an impact crusher involves more than comparing specifications and prices. Real projects demonstrate how impact crushers are used for aggregate production, road construction, and construction waste recycling. Explore the following cases to learn about the materials processed, equipment configurations, and production requirements across different applications. Use these projecs to help evaluate a suitable crushing solution for your needs.
With Indonesia’s rapid infrastructure development and urbanization, the demand for aggregates continues to rise. Whether for roads, bridges, ports, or residential projects, aggregates are an essential building material. Investing in a high-efficiency, durable impact crusher can ensure a steady supply, reduce costs, and increase profitability. Here’s an in-depth look at why investing in a compact impact crusher in Indonesia makes sense.
An impact crusher works by using a high-speed rotating rotor to throw feed material against impact plates, breaking it into smaller pieces. As the material undergoes repeated impacts, it gradually reaches the required particle size. The crushing process depends on factors such as rotor speed, feed size, material hardness, and the gap between the rotor and impact plates. Watch the video and review the animation below to understand the impact crusher working principle.
Rock or other suitable feed material enters the impact crusher through the feed opening and moves into the crushing chamber. The maximum feed size and material properties must match the crusher’s specifications.
The motor drives the rotor at high speed. The blow bars or hammers mounted on the rotor strike the incoming material and accelerate it toward the impact plates.
When the accelerated material hits the impact plates, the collision breaks larger pieces into smaller fragments. The force of impact initiates the main size-reduction process.
The material may undergo additional impacts from the rotor and impact plates until it reaches a size that allows it to leave the crushing chamber. The final particle size depends on the crusher design, operating settings, and feed characteristics.
Crushed material exits through the discharge opening. If the application requires specific aggregate sizes, a vibrating screen can separate the output into different size fractions. Oversized material may require further crushing, depending on the plant configuration.
Impact crushers used in Indonesia’s quarries, aggregate plants, road construction projects, and construction waste recycling facilities may experience vibration, oversized discharge, unusual noise, or bearing overheating. Dust, wet feed material during the rainy season, abrasive rock, and inconsistent feed conditions can contribute to operating problems. The correct response depends on the symptoms and their underlying causes. Use the following troubleshooting guide to identify what to check and when maintenance is required.
Safety note: Before inspecting, cleaning, or adjusting a single rotor impact crusher, stop the equipment, isolate all relevant energy sources, and follow the manufacturer’s lockout and maintenance procedures. Never reach into the crushing chamber or adjust internal components while the machine is running.
Regular impact crusher maintenance helps contractors in Indonesia maintain stable production, reduce unplanned downtime, and extend equipment service life. At quarries, road construction sites, and aggregate production facilities, tropical heat, high humidity, dust, and seasonal rainfall can increase maintenance demands. Follow the inspection, wear-part replacement, and lubrication procedures below, and always confirm that technical limits match your specific crusher model.
For Indonesian quarrying, road construction, and aggregate production operations, record inspection results, operating hours, lubrication work, and wear-part replacements. A consistent maintenance log helps operators identify recurring problems and plan servicing around production requirements.
Safety note: Before inspection, cleaning, or repair, stop the crusher, isolate all relevant energy sources, and follow the manufacturer’s lockout procedures. Only qualified personnel should perform rotor balancing, bearing maintenance, and hydraulic housing operations.
The best crusher for a project in Indonesia depends on the feed size, material hardness and abrasiveness, required output size, aggregate shape, and production capacity. A jaw crusher is commonly used for primary crushing of large rocks, an impact crusher is often selected for producing well-shaped aggregates from suitable materials, and a cone crusher is widely used for secondary or tertiary crushing of hard, abrasive rock. The comparison below explains their main differences and typical applications.
| Comparison | Jaw Crusher | Impact Crusher | Cone Crusher |
|---|---|---|---|
| Main Crushing Stage | Primary crushing | Secondary crushing; primary crushing for suitable feed materials and models | Secondary or tertiary crushing |
| Crushing Principle | Compresses material between a fixed jaw and a moving jaw | Breaks material through high-speed impact against impact plates | Compresses material between a gyrating mantle and a stationary concave |
| Suitable Materials | Granite, andesite, limestone, and other rock types within the machine’s specifications | Limestone, selected concrete waste, and other suitable materials with acceptable abrasiveness | Granite, andesite, and other hard, abrasive rocks within the machine’s specifications |
| Feed Size | Suitable for large feed rocks, depending on the feed opening and model | Depends on the rotor design, feed opening, and model specifications | Generally receives material from a primary crusher; allowable feed size varies by model |
| Typical Product Characteristics | Crushed material suitable for further processing in a multi-stage plant | Often produces well-shaped, cubical aggregates | Produces relatively consistent aggregate sizes when properly configured |
| Main Advantages | Handles large rocks and provides a practical solution for primary size reduction | Good particle shaping and effective crushing of suitable materials | Well suited to continuous crushing of hard, abrasive rock |
| Key Considerations | May require secondary crushing to achieve the final product size | Wear-part consumption can increase when processing highly abrasive materials | Requires suitable feed conditions and correct settings; investment and maintenance costs depend on the configuration |
| Typical Applications in Indonesia | Quarries, aggregate plants, and the primary crushing stage of road construction projects | Aggregate shaping, limestone processing, and suitable construction waste recycling projects | Hard-rock quarries and secondary or tertiary aggregate production using granite or andesite |
| Common Plant Configuration | Jaw crusher + secondary crusher + vibrating screen | Jaw crusher or suitable feeder + impact crusher + vibrating screen, depending on feed conditions | Jaw crusher + cone crusher + vibrating screen |
| Best Choice When | You need to reduce large rocks during the first crushing stage | Aggregate shape is important and the feed material is suitable for impact crushing | You need to process hard, abrasive rock in secondary or tertiary crushing |
Choosing and operating an impact crusher involves more than comparing capacity and price. Contractors in Indonesia also need to understand the crushing process, key components, wear-part replacement, and differences between impact and hammer crushers. The following FAQs explain these points to help quarry operators, aggregate producers, road contractors, and construction waste recyclers make informed equipment decisions.
An impact crusher uses a high-speed rotor fitted with blow bars or plate hammers to break material against impact plates. It can produce well-shaped, cubical aggregates when the material and operating settings are suitable.
In Indonesia, impact crushers are used for limestone processing, aggregate production, road construction, and selected construction waste recycling projects. Material hardness, abrasiveness, moisture, and feed size all affect crusher selection.
An impact crusher can serve as a primary impact crusher or secondary crusher, depending on the model and application. Many aggregate plants use a jaw crusher for primary crushing, followed by an impact crusher to reduce material size or improve particle shape.
The main components of a typical single-rotor impact crusher work together to feed, crush, and discharge material. Their exact design varies by model, but the principal impact crusher components commonly include:
Understanding these impact crusher parts helps operators identify wear, plan maintenance, and select appropriate replacement parts. Always consult the specific crusher manual because component names and adjustment mechanisms vary between models.
The main wear parts of a typical impact crusher include blow bars or plate hammers, impact plates, and internal liners. Their service life depends on material abrasiveness, feed size, operating settings, throughput, and maintenance practices.
For Indonesian quarries processing abrasive rock, regular wear inspections and timely replacement can help maintain consistent production. When planning impact crusher spare parts, consider the feed material, expected operating hours, and the manufacturer’s recommended replacement criteria.
Both impact crushers and hammer crushers use impact force to break materials, but they differ in rotor design, crushing chamber structure, and material suitability.
Similarities
Key Differences
Which should you choose? For aggregate production in Indonesia, consider a double rotor impact crusher when particle shape matters and the material is suitable. Choose a hammer crusher when its design matches your material and target product size. Always compare capacity, feed size, and wear-part costs.
Looking for an impact crusher for cubical aggregate production, limestone crushing or construction waste recycling in Indonesia? ANDAMINE customizes impact crusher setups to fit your capacity, feed size and site conditions. Send us your project details for a targeted quotation and suitable impact crusher machine recommendation.
